Terex Genie ZX-135/70, Operator'S Manual

Page: 64 / 66

Operator's Manual Second Edition • Third Printing
Specifications
62 ZX-135/70 Part No. 1258936
Specifications
Model
ZX-135/70
Height, working maximum 42.9 m
Height, platform maximum 41.4 m
Height, stowed maximum 3.1 m
Horizontal reach, maximum 21.3 m
Width, axles retracted 2.5 m
Width, axles extended 5 m
Length, stowed 12.9 m
Maximum load capacity 272 kg
Maximum wind speed 12.5 m/s
Wheelbase, axles extended 2.2 m
Wheelbase, axles retracted 5 m
Ground clearance 38 cm
Turning radius, axles extended
Inside 3 m
Outside 6.3 m
Turning radius, axles retracted
Inside 7.3 m
Outside 8.6 m
Turntable rotation (degrees) 360° continuous
Turntable tailswing,
secondary boom lowered 4.3 m
Turntable tailswing,
secondary boom raised 0.74 m
Controls 12V DC proportional
Platform dimensions, 1.8 m
(length x width) 182 x 76 cm
Platform dimensions, 2.4 m
(length x width) 244 x 91 cm
Platform leveling self-leveling
Platform rotation 160°
AC outlet in platform standard
Fuel tank capacity 151 liters
Hydraulic pressure, maximum
(boom functions) 203 bar
Hydraulic pressure, maximum
(auxiliary power unit) 218 bar
System voltage 12V
Tire size 445/65 D22.5
or 445D50/710, 18 ply FF
Weight 20,457 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Airborne noise emissions
Sound pressure level at ground workstation <85 dBA
Sound pressure level at platform workstation <74 dBA
Total vibration value to which the hand/arm system is
subjected does not exceed 2.5 m/s
2
.
Highest root mean square value of weighted
acceleration to which the whole body is subjected does
not exceed 0.5 m/s
2
.
Maximum slope rating, stowed position, 4WD
Counterweight uphill 45% 24°
Counterweight downhill 30% 17°
Side slope 25% 14°
Note: Slope rating is subject to ground conditions and
adequate traction.
Drive speeds
Drive speed, stowed 4.8 km/h
12.2 m/9.1 sec
Drive speed, raised or extended 1.1 km/h
12.2m/40 sec
Drive speed, raised and extended 0.6 km/h
12.2 m/68 sec
Floor loading information
Tire load maximum 9,979 kg
Tire contact pressure 5.77 kg/cm
2
566 kPa
Occupied floor pressure 1,411 kg/m
2
13.84 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.