Second Edition • Third Printing
Operator's Manual
Work Area Safety
Part No. 1258936
ZX-135/70 13
Do not place or attach
fixed or overhanging loads
to any part of this
machine.
Do not place ladders or
scaffolds in the platform or
against any part of this
machine.
Do not transport tools and materials unless they
are evenly distributed and can be safely handled
by person(s) in the platform.
Do not use the machine on a moving or mobile
surface or vehicle.
Be sure the tires are in good condition and the lug
nuts tightened.
Operation on Slopes Hazards
Do not drive the machine on a slope that exceeds
the maximum uphill, downhill or side slope rating of
the machine. Slope rating applies only to machines
in the stowed position.
Maximum slope rating, stowed position
Platform downhill
45% (24°)
Platform uphill
30% (17°)
Side slope
25% (14°)
Note: Slope rating is subject to ground conditions
and adequate traction. See Driving on a Slope in
the Operating Instructions section.
Summary of Contents for Genie ZX-135/70
Page 9: ...Second Edition Third Printing Operator s Manual General Safety Part No 1258936 ZX 135 70 7...
Page 10: ...Operator s Manual Second Edition Third Printing General Safety 8 ZX 135 70 Part No 1258936...
Page 47: ...Second Edition Third Printing Operator s Manual Inspections Part No 1258936 ZX 135 70 45...