Terex Genie ZX-135/70, Operator'S Manual

Page: 54 / 66

Operator's Manual Second Edition • Third Printing
Operating Instructions
52 ZX-135/70 Part No. 1258936
Platform Out of Level (P22 code)
Bypass key position to be used to level the
platform if ground control display shows platform
out of level (P22) and platform level controls do not
work.
To operate:
1 Turn the engine off.
2 Turn the main key switch to ground control.
Remove the key from the main key switch and
insert the key into the bypass/recovery key
switch.
3 Turn the
bypass/recovery key
switch to the bypass
position.
4 Using emergency power, operate the platform
level button to level the platform.
5 Turn the bypass/recovery key switch to the run
position.
6 Remove the key from the bypass/recovery key
switch and insert the key into the main key
switch.
7 Push in and then pull out the red Emergency
Stop button.
8 If the P22 code is still visible, tag and remove
the machine from service until the fault has
been corrected by a qualified service
technician.
Platform Out of Level
(Platform Level > 15 Degrees Fault)
If ground control display shows PLATFORM
LEVEL > 15 DEGREES FAULT and the platform
level controls do not work, the machine will need to
be recovered by trained and authorized personnel
or a qualified service technician.
Platform Overload Indicator Light
Light flashing indicates the
platform is overloaded and no
functions will operate.
Remove weight from the
platform until the light goes off.
Overload Recovery
If the ground controls LCD screen displays
OVERLOAD RECOVERY, the emergency
lowering system has been used while the platform
was overloaded. For information on how to reset
this message, please consult the appropriate
Genie Service Manual.
Generator (if equipped)
To operate the generator, move the generator
switch. The indicator light will come on and the
engine will continue to run.
Plug a power tool into the power to platform GFCI
outlet.
To turn off the generator, move the generator
switch. The indicator light will turn off.
P22 P22