Operator's Manual
First Edition • Second Printing
Specifications
62
Z-60/37DC • Z-60/37FE
Part No. 1270491
Specifications
Model
Z-60/37DC
Height, working maximum
20 m
Height, platform maximum
18.16 m
Height, stowed maximum
2.54 m
Horizontal reach, maximum
11.15 m
Width 2.49
m
Length, stowed
8.15 m
Maximum load capacity
227 kg
Maximum wind speed
12.5 m/s
Wheelbase 2.49
m
Ground clearance, center
33 cm
Ground clearance, axle
31.5 cm
Turning radius (outside)
5.69 m
Turning radius (inside)
2.51 m
Turntable rotation (degrees)
355°
Turntable tailswing
(riser up)
0.58 m
Turntable tailswing
(riser down)
0.81 m
Platform dimensions, 6 foot
(length x width)
183 x 76 cm
Platform dimensions, 8 foot
(length x width)
244 x 91 cm
Platform leveling
self-leveling
Platform rotation
160°
Controls
24V DC proportional
AC outlet in platform
standard
Hydraulic pressure, maximum
(boom functions)
206.8 bar
System voltage
48V
Tire size
355/55 D625, 14 ply
Weight 7530
kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Maximum slope rating, stowed position, 4WD
Platform downhill
45% 24°
Platform uphill
45% 24°
Side slope
25% 14°
Note: Slope rating is subject to ground conditions with
one person in the platform and adequate traction.
Additional platform weight may reduce slope rating.
Drive speeds
Drive speed, stowed, 4WD
6.4 km/h
12.2 m/8.5 sec
Drive speed, raised or extended
1.0 km/h
12.2 m/40sec
Airborne noise emissions
Sound pressure level at ground workstation
<85 dBA
Sound pressure level at platform workstation
<74 dBA
Guaranteed sound power level
105 dBA
Total vibration value to which the hand/arm system is
subjected does not exceed 2.5 m/s
2
.
Highest root mean square value of weighted
acceleration to which the whole body is subjected does
not exceed 0.5 m/s
2
.
Floor loading information
Tire load maximum
4,173 kg
Tire contact pressure
9.14 kg/cm
2
896 kPa
Occupied floor pressure
879 kg/m
2
8.62 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
