First Edition • Second Printing
Operator's Manual
Controls
Part No. 1270491
Z-60/37DC • Z-60/37FE
23
5
LCD display
At machine start up the LCD screen displays
pitch and roll angles of the machine, the
number of hours the machine has operated,
the battery charge level and the alarm beeps
4 seconds. The screen also displays fault
codes and other service information.
6
Key switch for ground selection/off/platform
Turn the key switch to the ground position and
the ground controls will operate. Turn the key
switch to the off position and the machine will
be off. Turn the key switch to the platform
position and the platform controls will operate.
7
DC mode light: FE models
Light on indicates the machine is in DC mode
8
Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.
9
Hybrid mode light: FE models
Light on indicates the machine is in Hybrid
mode
10
Machine mode select switch: FE Models
Move the switch to the left to select DC mode
Move the switch to the right to select Hybrid
mode
11
Jib boom up/down switch
Move the jib boom switch up and the jib boom
will raise. Move the jib boom switch down and
the jib boom will lower.
12
Platform level switch
Move the platform level switch up and the level
of the platform will raise. Move the platform
level switch down and the level of the platform
will lower.
13
Platform overload indicator light
Light flashing indicates the platform is
overloaded and no functions will operate.
Remove weight until the light goes off.
14
Turntable rotate switch
Move the turntable rotate switch up and the
turntable will rotate to the right. Move the
turntable rotate switch down and the turntable
will rotate to the left.
15
Platform rotate switch
Move the platform rotate switch down and the
platform will rotate to the right. Move the
platform rotate switch up and the platform will
rotate to the left.
16
Emergency power switch
Use emergency power if the primary power
source (engine) fails.
Simultaneously hold the emergency power
switch to either side and activate the desired
function.