First Edition • Second Printing
Operator's Manual
Operating
Instructions
Part No. 1270491
Z-60/37DC • Z-60/37FE
49
Drive Enable
Light on indicates that the boom
has moved just past either
non-steer wheel and the drive
function has been interrupted.
To drive, hold the drive enable switch to either side
and slowly move the drive control handle off
center.
Be aware that the machine may move in the
opposite direction that the drive and steer controls
are moved.
Always use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the machine will travel.
Drive Speed Select
Machine on incline symbol: Low range for
improved throttle control at reduced drive
speed.
Machine on level surface symbol: High range
operation for maximum drive speed
Function Speed Control
1
Move the switch to the
left to decrease the
function speeds for jib
up/down, platform rotate
and primary boom
extend/retract.
2
Move the switch to the
right to increase the
function speeds for jib
up/down, platform rotate
and primary boom
extend/retract.
Note: Function speeds will increase or decrease by
5% each time the function speed control switch is
moved. The speed control switch can also be held
in either direction to increase or decrease function
speed.
AC Inverter (if equipped)
The inverter supplies power to
the platform when external AC
power is removed.
Plug the power to platform
cable on the machine into the
the inverter power cable.
Move the inverter switch up to activate the inverter.
Move the switch down to turn off the inverter. All
boom functions will operate while the inverter is
in use.
