Operator's Manual
Fifth Edition • Second Printing
46
S-100 • S-105 • S-120 • S-125
Part No. T113597
Drive Enable
Light on indicates that the
boom has moved past either
circle-end wheel and drive
function has been interrupted.
To drive, push the drive enable button and slowly
move the drive/steer control handle off center.
If the drive/steer control handle is not moved
within two seconds of pushing the drive enable
button, the drive function will not operate. Release
and push the drive enable button again.
Be aware that the machine may move in the
opposite direction that the drive and steer controls
are moved.
Always use the color-coded direction arrows on
the platform controls and the drive chassis to
identify the direction the machine will travel.
Engine Idle Select (rpm)
Select the engine idle (rpm) by pressing the
select button. The indicator light next to the
current setting will be on.
·
Rabbit and foot switch symbol:
foot switch activated high idle
·
Turtle symbol: low idle
·
Rabbit symbol: high idle
Check Engine Light
Light on and engine stopped:
Tag the machine and remove
from service.
Light on and engine still running:
Contact service personnel
within 24 hours.
Operating Envelope Indicator Lights
The operating envelope indicator lights will come
on to notify the operator that a function has been
interrupted and/or an action is required by the
operator.
Raise Boom indicator light
flashing: To continue extending
the boom, raise the boom until
the indicator light is off.
Retract Boom indicator light
flashing: To continue lowering
the boom, retract the boom until
the indicator light is off.
Machine Not Level indicator
light flashing: The tilt alarm will
be sounding when this light is
flashing. Move the machine to a
firm level surface.
Platform Not Level indicator
light flashing: The tilt alarm will
be sounding when this light is
flashing. The Platform Level
toggle switch will only work in
the direction that will level the
platform. Level the platform until
the indicator light is off.
Operating Instructions
