Operator's Manual
Fifth Edition • Second Printing
10
S-100 • S-105 • S-120 • S-125
Part No. T113597
Work Area Safety
The weight of options and accessories, such as
pipe cradles, panel cradles, and welders, will
reduce the rated platform capacity and must be
factored into the total platform load. See the decals
with the options and accessories.
If using accessories,
read, understand and
obey the decals and
instructions with the
accessory.
Do not raise or extend
the boom unless the
machine is on a firm,
level surface.
Do not depend on the
tilt alarm as a level
indicator. The tilt alarm
sounds in the platform
only when the machine
is on a severe slope.
If the tilt alarm sounds while the boom is lowered:
Do not extend, rotate or raise the boom above
horizontal. Move the machine to a firm, level
surface before raising the platform.
If the tilt alarm sounds while the boom is raised:
Use extreme caution. Identify the condition of the
boom on the slope as shown below. Follow the
steps to lower the boom before moving to a firm,
level surface. Do not rotate the boom while
lowering.
If the tilt alarm sounds with
the platform uphill:
First lower the boom, then
retract the boom.
If the tilt alarm sounds with
the platform downhill:
First retract the boom,
then lower the boom.
Do not raise the boom when wind speeds may
exceed 12.5 m/s. If wind speeds exceed 12.5 m/s
when the boom is raised, lower the boom and do
not continue to operate the machine.
