Operator's Manual
Fifth Edition • Second Printing
26
S-100 • S-105 • S-120 • S-125
Part No. T113597
Controls
12 Engine idle (rpm) select button with indicator
lights
Push the engine idle select button to choose
engine rpm setting. The indicator light next to
the current setting will be on.
13 Gasoline/LPG models: Fuel select button with
indicator lights
When the indicator light next to the LPG tank is
lit, the engine will run on LPG. When the
indicator light next to the gas tank is lit, the
engine will run on gasoline.
14 Fault indicator light
Light on indicates the machine has one or more
faults. Faults are abnormal conditions that exist
due to component failure or system misuse.
See the appropriate service manual.
15 Low fuel indicator light
Light on indicates the machine is low on fuel.
16 Check engine indicator light
Light on indicates an engine fault.
17 Red Emergency Stop button
Push in red Emergency Stop button to the off
position to stop all functions and turn the engine
off. Pull out the red Emergency Stop button to
the on position to operate the machine.
18 Dual axis proportional control handle for drive
and steer functions
OR Proportional control handle for drive function
and thumb rocker switch for steer function
Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will drive forward. Move the
control handle in the direction indicated by the
yellow arrow and the machine will drive
backwards. Move the control handle in the
direction indicated by the blue triangle and the
machine will steer to the left. Move the control
handle in the direction indicated by the yellow
triangle and the machine will steer to the right.
OR
Move the control handle in the direction
indicated by the blue arrow on the control panel
and the machine will drive forward. Move the
control handle in the direction indicated by the
yellow arrow and the machine will drive
backwards. Press the left side of the rocker
switch and the machine will steer to the left.
Press the right side of the rocker switch and the
machine will steer to the right.
19 Power indicator light
Light is on when the red Emergency Stop
button is pulled out to the on position.
20 Platform overload indicator light
Flashing light indicates the platform is
overloaded. The engine will stop and no
functions will operate.
Remove the weight from the platform until the
light goes off and then restart the engine.
21 Steer mode select buttons with indicator lights
Push the steer mode select button to choose
steer mode. The indicator light next to the
current steer mode will be on.
