Terex Genie GS-3369BE, Operator'S Manual

Page: 25 / 58

Third Edition • First Printing
Operator's Manual
Controls
Part No. 1305656GT GS
™
-
2669BE • GS ™
-
3369BE • GS ™
-4069BE 23
5 Proportional control handle and function enable
switch for drive, steer, lift and outrigger
functions
Lift function: Press and hold the function enable
switch to enable the lift function on the platform
control handle. Move the control handle in the
direction indicated by the blue arrow and the
platform will raise. Move the control handle in
the direction indicated by the yellow arrow and
the platform will lower. The descent alarm
should sound while the platform is lowering.
Drive function: Press and hold the function
enable switch to enable the drive function on
the platform control handle. Move the control
handle in the direction indicated by the blue
arrow on the control panel and the machine will
move in the direction that the blue arrow points.
Move the control handle in the direction
indicated by the yellow arrow on the control
panel and the machine will move in the
direction that the yellow arrow points.
Outrigger function: Press and hold the function
enable switch to enable the outrigger function
on the platform control handle. Move the
control handle in the direction indicated by the
blue arrow and the outriggers will retract. Move
the control handle in the direction indicated by
the yellow arrow and the outriggers will extend.
6 Thumb rocker switch for steer function
Press the left side of the thumb
rocker and the machine will turn in
the direction the blue triangle points
on the platform control panel.
Press the right side of the thumb
rocker and the machine will turn in
the direction the yellow triangle
points on the platform control
panel.
7 LED diagnostic readout / battery charge
indicator
8 Drive function button
Push this button to activate the
drive function.
9 Outrigger indicator lights
During outrigger extension,
lights flash green. As each
outrigger contacts the ground,
lights turn solid green. Any time
the outrigger extension
procedure is interrupted, the
lights will flash green indicating
the outriggers are not
contacting the ground or the
outriggers are not fully
deployed. During outrigger
retraction lights turn solid
green. As each outrigger fully
retracts, lights turn off. Lights
will turn solid red, indicating the
corresponding outrigger is at
end of stroke.
10 Outrigger function button
Press this button to activate the
outrigger function.