Operator's Manual
Second Edition • First Printing
Operating Instructions
48 GS
™
-1330m
Part No. 1301858GT
Battery and Charger Instructions
Observe and Obey:
Do not use an external charger or booster
battery.
Charge the battery in a well-ventilated area.
Use proper AC input voltage for charging as
indicated on the charger.
Use only a Genie authorized battery and
charger.
To Charge Battery
1
Be sure the batteries are connected before
charging the batteries.
2
Open the battery compartment. The
compartment should remain open for the entire
charging cycle.
Maintenance-free batteries
1
Connect the battery charger to a grounded AC
circuit.
2
The charger will indicate when the battery is
fully charged.
Standard Batteries
1
Remove the battery vent caps and check the
battery acid level. If necessary, add only
enough distilled water to cover the plates. Do
not overfill prior to the charge cycle.
2
Replace the battery vent caps.
3
Connect the battery charger to a grounded AC
circuit.
4
The charger will indicate when the battery is
fully charged.
5
Check the battery acid level when the charging
cycle is complete. Replenish with distilled
water to the bottom of the fill tube. Do not
overfill.
Summary of Contents for Genie GS-1432m
Page 59: ......
