background image

Operator's Manual

 

Second Edition • First Printing

 

Introduction 

 

 

4 GS

-1330m

 

Part No. 1301858GT 

 

 

Danger 

Failure to obey the instructions and 
safety rules in this manual will result 
in death or serious injury. 

Do Not Operate Unless: 

 

You learn and practice the principles of safe 
machine operation contained in this operator’s 
manual. 

1  Avoid hazardous situations.

 

Know and understand the safety rules 
before going on to the next section.

 

2  Always perform a pre-operation inspection. 

3  Always perform function tests prior to use. 

4  Inspect the workplace. 

5  Only use the machine as it was intended. 

 

You read, understand and obey the 
manufacturer’s instructions and safety 
rules–safety and operator’s manuals and 
machine decals. 

 

You read, understand and obey employer’s 
safety rules and worksite regulations. 

 

You read, understand and obey all applicable 
governmental regulations. 

 

You are properly trained to safely operate the 
machine. 

Safety Sign Maintenance 

Replace any missing or damaged safety signs. 
Keep operator safety in mind at all times. Use mild 
soap and water to clean safety signs. Do not use 
solvent-based cleaners because they may damage 
the safety sign material. 

Summary of Contents for Genie GS-1432m




























































Reviews: