Terex Genie AWP Series, Operator'S Manual, Page: 41 / 45

Fifth Edition • First Printing
Operator's Manual
Tilt-back Operation Instructions
Part No. 1298034GT AWP
®
Super Series 39
Returning the Machine to
Standing Position
1 Be sure the area below the machine base and
T-handle is clear of personnel and
obstructions.
2 Slide out the T-handle until
the lock pin snaps into
place.
3 Carefully pull down the T-
handle until the machine
rests at mid-tilt position.
4 Lower the machine with the T-handle until the
base casters are in contact with the ground.
Use the appropriate number of people and
proper lifting techniques.
5 Return the sliding T-handle to the stowed
position.
Stowing the Tilt-back Assembly
1 Remove the retaining pin.
2 Firmly grasp the tilt-
back frame and remove
the tilt-back strut from
the strut socket.
3 Lift the tilt-back frame,
hold in an upright
position against the
spring and secure with
the retaining pin.