Terex Genie AWP Series, Operator'S Manual, Page: 39 / 45

Fifth Edition • First Printing
Operator's Manual
Tilt-back Operation Instructions
Part No. 1298034GT AWP
®
Super Series 37
Tilt-bac k O perati on I nstr uctions
Tilt-back Operation Instructions
Observe and Obey:

The retaining pin must be inserted to prevent
the spring-loaded tilt-back frame from
dropping.

Do not tilt the machine back unless the area is
clear of personnel and obstructions.

Do not stand behind or under the tilt-back
frame when raising or lowering it.
Lifting Instructions
The number of people required to load and unload
a machine is dependent on a number of factors,
including but not limited to:

the physical condition, strength and disabilities
or prior injuries of the people involved

the vertical and horizontal distances the
machine has to be moved

the number of times the machine will be loaded
or unloaded

the stance, posture and grip used by the
people involved

the lifting techniques used

the site conditions and weather in which the
activity is being performed (i.e., slippery, icy,
raining)
The appropriate number of people and proper
lifting techniques must be used to prevent physical
injury.
Tilt-back Frame
The Genie AWP Super Series
has a tilt-back frame which
allows the machine to roll
through a standard doorway. The
tilt-back frame is standard
equipment on standard base
AWP-36S and 40S models, and
optional on standard base AWP-
15S, 20S, 25S and 30S models.
The tilt-back frame is not
available on narrow base
machines or rough terrain base
machines.