Terex Genie AWP Series, Operator'S Manual, Page: 21 / 45

Fifth Edition • First Printing
Operator's Manual
Inspections
Part No. 1298034GT AWP
®
Super Series 19
Pre-operation Inspection
 Be sure that the operator’s, safety and
responsibilities manuals are complete, legible
and in the storage container located in the
platform.

Be sure that all decals are legible and in place.
See Decals section.

Check for battery fluid leaks and proper fluid
level. Add distilled water if needed. See
Maintenance section.

AC & DC models: Check for hydraulic oil leaks
and proper oil level. Add oil if needed. See
Maintenance section.

RT Base models: Check for proper tire
pressure. Add air if needed. See Maintenance
section.

Air models: Check the oil level of the airline
lubricator. See Maintenance section.

Air models: Check the oil lubricator canister
drip rate. Adjust as needed. See Maintenance
section.

Air models: Check the air filter/regulator
canister. Drain water as needed. See
Maintenance section.
Check the following components or areas for
damage, improperly installed, or missing parts and
unauthorized modifications:

Electrical components, wiring, and
electrical cables

AC & DC models: Hydraulic power unit,
reservoir, hoses, fittings, and cylinder

Air models: Air power unit, air lines, fittings
and cylinder

Platform entry mid-rail or gate

Sequencing cables and pulleys

Lifting chains and idler wheels

Nuts, bolts and other fasteners

Mast columns and counterweight

Breather cap

Outriggers, leveling jacks and footpads

Adjustable glide pads

Lanyard anchorage points

Casters and brakes (if equipped)
Check entire machine for:

Cracks in welds or structural components

Dents or damage to machine

Excessive rust, corrosion or oxidation

Inspect and clean battery terminals and all
battery cable connections.

Verify that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.