Terex AL4L, Service Manual

Page: 20 / 67

REV B
August 2016
3 - 6 AL4L • AL5L Part No. 229171
Section 3 • Scheduled Maintenance Procedures
A-4
Perform Engine Maintenance -
Kubota D1105-D3BG Models
Terex specifi cations require that this procedure be
performed at the beginning of every work shift or
daily, whichever comes fi rst.
• Oil level and leaks
• Coolant level and leaks
• Damaged or loose parts
• Color of exhaust
• Unusual engine noise
Required maintenance procedures and additional
engine information is available in the
Kubota
D1105 Operators Manual (Kubota part number
16622-89166)
Kubota D1105 Operators Manual
Genie part number 131379
A-5
Perform Coupler Maintenance
Coupler specifi cations require that this procedure
be performed before towing.
Maintaining the coupler in good condition is
essential to safe operation and good performance.
Coupler failure could result in a machine tip-over
during transport, and component damage may
also result if problems are not discovered and
repaired in a timely fashion.
1 Check vehicle, mounting bracket, hitch ball and
coupler for signs of wear or damage and that
the coupler handle opens and closes freely.
Result: If coupler and/or mounting bracket
is deformed or damaged, replace complete
coupler and mounting bracket. Replace bent,
broken or worn parts before use.
2 Close coupler securely by ensuring that the
hitch ball is fully seated in the coupler ball
pocket and the pin is inserted behind the collar
or latch.
3 Check mounting bracket hardware for wear and
proper tightness.
Result: Replace bent, broken or worn hardware.
CHECKLIST A PROCEDURES