XM762-V1.0-NR
34
Cyan Color wheel Er
(Cyan color wheel- error) This message will appear after the reset of the fixture if the
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is
defective (or its driving IC on the main PCB). The cyan color wheel is not located in the default
position after the reset.
Magenta color wheel Er
(Magenta color wheel- error) This message will appear after the reset of the fixture if the
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is
defective (or its driving IC on the main PCB). The magenta color wheel is not located in the
default position after the reset.
Yellow color wheel Er
(Yellow color wheel- error) This message will appear after the reset of the fixture if the
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is
defective (or its driving IC on the main PCB). The Yellow color wheel is not located in the
default position after the reset.
Color wheel Er
(Color wheel- error) This message will appear after the reset of the fixture if the
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is
defective (or its driving IC on the main PCB). The color wheel is not located in the default
position after the reset.
Gobo wheel 1 Er
(Gobo wheel 1
- error) This message will appear after the reset of the fixture if the
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is
defective (or its driving IC on the main PCB). The Gobo wheel 1 is not located in the default
position after the reset.
Gobo Rot 1 Er
(Gobo Rot 1- error) This message will appear after the reset of the fixture if the
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is
defective (or its driving IC on the main PCB). The Gobo Rot 1 is not located in the default
position after the reset.
Gobo wheel 2 Er
(Gobo wheel 2
- error) This message will appear after the reset of the fixture if the
magnetic-indexing circuit malfunction (sensor failed or magnet missing) or the stepping-motor is
defective (or its driving IC on the main PCB). The Gobo wheel 2 is not located in the default
position after the reset.
Focus Er
(Focus error) This message will appear after the reset of the fixture if the magnetic-indexing
circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its
driving IC on the main PCB). The Focus is not located in the default position after the reset.
Zoom Er
(Zoom error) This message will appear after the reset of the fixture if the magnetic-indexing
circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective (or its
driving IC on the main PCB). The Focus is not located in the default position after the reset.