DE10-Nano
Getting Started Guide
July 25, 2017
www.terasic.com.tw
4
Chapter 2
Development Board Setup
2.1 Introduction
The instructions in this section explain how to set up the DE10-Nano development board. The
following pictures are the board overview of DE10-Nano.
2.2 MSEL Settings
FPPx32 Mode (Default)
The FPGA Configuration Mode Switch (MSEL) shown in
Figure 2-1
is by default set to
01010
(MSEL[4:0] = 01010). The setting corresponds to FPGA configured from HPS software (in the SD
Card) in FPPx32 mode.
If users want to boot with Linux Xfce desktop, please setting MSEL
switch in this mode
Figure 2-1 FPGA Configuration Mode Switch set in FPPx32 Mode
