DE10-Nano
Getting Started Guide
July 25, 2017
www.terasic.com.tw
22
Figure 5-4 Putty Window
5.3 Running Linux on DE10-Nano board
This section presents how to run the pre-built Linux images on the DE10-Nano board. You can run
the Linux by following the steps below:
1.
Insert the factory microSD card with the pre-built image into the board (See Section 5.4 to
prepare a microSD card)
2.
Make sure the MSEL switch is set to “MSEL[4:0] = 01010”
3.
Power up the board (See
Chapter 2
for details)
4.
Open putty.exe, select the saved configuration
de10_nano
and click open button.
5.
After the board is successfully booted, the Linux will ask for the login name. Type "
root
"
and press the Enter key to skip the password
