DE10-Nano
Getting Started Guide
July 25, 2017
www.terasic.com.tw
21
Figure 5-3 USB Serial Poet driver is installed correctly
4.
Now you can power off the DE10-Nano board
Configure UART terminal
UART terminal spec:
115200 baud rate
no parity
1 stop bit
no flow control settings
The following steps shows how to configure a PuTTY terminal window (can be downloaded from
the link:
http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe
)
1.
Open putty.exe, click
Serial
go to a serial configure interface.
2.
Configure the window like the flowing picture and click “save” button to save the
configuration.
