A S T 3 9 8 8 0 ( 0 8 0 7 )
8 o f 3 0
PC Interface Adapter Block (Blue)*
(TDS35541441)
Connects the PC to the GNA600 through a
standard PC Ethernet cable (cable not included).
NOTE -
The PC Interface Adapter Block is not needed if you connect the PC
to the GNA600 with the USB PC Interface Cable (TDS35525406).
Trigger Switch
(TDS35541 359)
When it is connected to the Trigger Switch Adapter
Block (TDS35541434), the Trigger Switch allows
the GNA600 to update control units/modules in
Storage Mode (without a PC). Not all software runs
in Storage Mode. Refer to each software package
to see if it can run in Storage Mode.
256 MB PCMCIA Memory Card*
(SSDP25M3012)
This memory card is used by the GNA600 (in
Storage Mode) for updating (reprogramming)
control units/modules.
.
*These are optional parts that can be purchased separately.
