A S T 3 9 8 8 0 ( 0 8 0 7 )
2 7 o f 3 0
8 - CARE AND MAINTENANCE
8.1 Cleaning the GNA600 Unit
WARNING -
Switch off the power to the GNA600 Unit, and disconnect all electrical
cables before cleaning it.
•
Clean the GNA600 Unit with a non-abrasive, mild cleaning agent only. Apply the cleaner to
a soft, lint free cloth, then lightly rub the unit with the cloth. Never apply the cleaner directly to
the unit.
•
Do not soak the cleaning cloth, and do not allow cleaning fluid to enter the electrical
connectors.
•
Do not use abrasive cleaners or any type of polish.
•
If dust or other particles get on the GNA600 Unit, lightly brush the unit off with a soft, lint
free cloth.
8.2 Cable Care
•
Always return the cables to their appropriate storage area. The cables can be damaged if
they are driven over or exposed to excessive temperatures.
•
To avoid damaging the cable ends and the adapter blocks, always connect and disconnect
these parts slowly and carefully.
8.3 PCMCIA Memory Card Compartment Lid
•
Once the PCMCIA card* has been installed and configured, keep the compartment lid
secured to the GNA600 Unit.
•
To avoid damaging the compartment lid seal, install the PCMCIA card slowly and carefully.
*This is an optional part that can be purchased separately.
