ENC-200™ H.264 Encoder
User Guide V1.8
43
4. Extended Function
4.1
Remote Control
This chapter describes the remote control of the ENC-200™ for media controls like Crestron or AMX.
To control the ENC-200™, the telnet protocol is used at the port number 2323. Furthermore here is no
login necessary.
If you want to block the remote control via the port number 2323, you can disable the remote
configuration port 2323 via the webpage ‘System / Remote’ of the ENC-200™. See chapter 3.4.10.
To test the remote control under windows you can open the command prompt tool. A practical way to
open a command window within Windows Explorer is to write C:\Windows\system32\cmd.exe.
Another way to open a new commando prompt is by choosing the Start menu and selecting
‘Run’
.
Then write
‘cmd’
in the text field and press the
‘OK’
button. See Figure 28.
Figure 28: Command to open the command prompt
In both cases the following window opens, see Figure 29.
Figure 29: 'Command Prompt' window to test the remote control of the ENC-200™
