ENC-200™ H.264 Encoder
User Guide V1.8
21
3.4.3
Menu: Encoder / Audio
Figure 8 shows the ‘Encoder / Audio’ page of the ENC-200™ encoder.
Figure 8: ‘Encoder / Audio’ page of the ENC-200™ encoder
Table 8 describes the ‘Encoder / Audio’ page of the ENC-200™.
Settings:
Description:
Codec:
Specifies the used audio codec of the transmitted stream. You
can choose between ‘AAC’ and ‘MPEG1’.
Bitrate:
Specifies the audio bitrate in KBit/s of the transmitted stream.
Input:
Specifies the audio input. You can choose between:
LINE (= Analogue audio with line level)
MIC (= Analogue audio with mic (microphone) level)
SDI (= SDI embedded audio)
AES
LineIn Gain:
Specifies the line level gain of the analogue audio input.
MicIn Gain:
Specifies the microphone level gain of the analogue audio input.
Output Gain:
Specifies the output gain (Audio Out, Talkback). If the output
signal is too weak or too powerful, you can set here the output
gain level.
Output Mute:
Mutes the audio output (Talkback).
Talkback Port:
Specifies the port number of the talkback channel. For a talkback
session the encoder and the decoder must have the same
talkback port number.
Talkback Rate:
Specifies the sample rate for the audio talkback function. The
sample rate which you select must be the same sample rate
which your decoder uses.
Table 8: Description of the ‘ENCODER/AUDIO’ webpage of the ENC-200™
