Teracue ENC-200, User Manual

Page: 17 / 59

ENC-200™ H.264 Encoder
User Guide V1.8
17
3.4 Encoder Configuration
3.4.1 Menu: Encoder / Settings
Under the menu option ‘ENCODER/SETTINGS’ you define the main operational state of the encoder.
Here you can set encoding process to ‘On’ or ‘Off’. See Figure 6.
Figure 6: 'Encoder / Settings' page of the ENC-200™ encoder
Settings: Description:
Page Refresh: Enables / Disables the refreshing of webpage every 10 seconds.
Encoder Start: Stops or starts the encoding process.
Stream Mode: Specifies the stream mode of the transmitted stream. You can
choose between:

TS (Transport Stream)

TS/VIDEO (Transport Stream Video Only)
 TS/AUDIO (Transport Stream Audio Only

VES (Video Elementary Stream)

AES (Audio Elementary Stream)
Padding: Specifies the padding mode. You can choose between:

ON (is recommend when a constant data rate is needed)

OFF (the transport stream has a variable data rate. All
settings in the ‘VBV size’ field of the ‘video’ webpage have
no effects)

LOWDELAY (the transport stream has a variable data
rate with enabled ‘Low Delay’ mode with the lowest delay.
All settings in the ‘VBV size’ field of the ‘video’ webpage
have no effects.)
.!. ‘LOWDELAY’ will create non-ISO standard TS
streams, but can reduce the delay. To support
‘LOWDELAY’, the decoding side of your streaming
chain (i.e. decoder or STB) needs to be able to handle
the PTS and DTS codes as ISO/standard streams.