ENC-200™ H.264 Encoder
User Guide V1.8
16
3.3.2
‘APPLY’ and ‘SAVE’ Buttons
A change or multiple changes of the configuration settings will only take effect
after the ‘> APPLY’ button is pressed.
The encoder will then start working with the new parameters, but the parameters
will not be saved to the encoder. Applied settings are not saved and will be lost
after a reboot.
Good for quickly testing and applying different settings.
Same as the ‘> APPLY’ button,
but
the configuration parameters will be applied
and saved to the encoders flash memory.
Saved parameters will be used by the encoder even when the encoder is turned
off & on or after a reboot has taken place.
Good for permanently saving the encoder configuration.
