TCW210-TH-R1.16- November 2022
Page 40
9.
Factory default settings
TCW210-TH can be restored to its original factory default settings in 3 different ways.
9.1.
Factory default from WEB interface
If the button
“Factory default” from Administration
->Backup/Restore is pressed, all parameters
return to factory default except Network settings.
9.2.
Factory default with the reset button
If the reset button is pressed for more than 5 seconds, while the device is working, all Network
settings go to factory default.
9.3.
General factory default with the reset button
For factory default reset of all parameters following steps should be executed:
•
Press and hold the RESET button, then turn on the power supply;
•
Yellow LED shines and red LED blinks about 5 times on
а
second;
•
After about 5 seconds red LED will turn off, the button can be released;
•
Yellow LED flashes on 1 second and red LED shines
–
the device is in working mode, with
factory default settings.
The factory default settings are:
Username
admin
Password
admin
IP Address
192.168.1.2
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.1
SNMPConfiguration
disabled
readCommunity
public
writeCommunity
private
Summary of Contents for TCW210-TH
Page 1: ......
Page 43: ...TCW210 TH R1 16 November 2022 Page 42 Appendix A Fig 1...
