TCW210-TH-R1.16- November 2022
Page 9
The page can be automatically refreshed on an interval of 0 to 253 seconds. Zero means no
automatic refresh. This parameter is set in section Setup->System->Monitoring page automatic
refresh. By default, it is 1 second.
7.1.2.
Graphs
Every graph page can display up to 4 parameters with up to 2 different dimension.
For every parameter different color can be set. There are a few checkboxes for display
modification.
Export of monitored parameters can be made from the page.
7.2.
Setup
7.2.1.
Network
The network parameters are set on this page.
The controller supports static and dynamic IP addresses.
It is good practice to change the default IP address of the controller immediately after first power-
on. This will avoid collisions if many devices are used on the same network.
It may be necessary to clear the arp cache, each time you connect a new device to the network.
This is done by typing
arp -d
in the command prompt window of the computer.
The “
Host
name” is up to 15 characters. It is shown in
the search results of TCW discoverer.
Summary of Contents for TCW210-TH
Page 1: ......
Page 43: ...TCW210 TH R1 16 November 2022 Page 42 Appendix A Fig 1...
