TCW210-TH-R1.16- November 2022
Page 13
The temperature fa
lls and when it reached 19°C it goes out of range (trigger and ale
rt conditions).
E-mail is sent.
The “Max” value is set far enough from the wanted temperature to avoid trigger/alert conditions
around it.
For every sensor, there are 3 independent ways of alert for alarm condition
–
e-mail, SNMP trap
and HTTP/HTTPS post of an XML/JSON file. Each alarm notification method is activated by a
checkbox.
Globally for all sensors, there is a
checkbox “Return notification”. If this option is chosen there
will be notification also when parameter returns in range.
Globally for all sensors, there are “Notification delay” p
arameter. It is very useful as a filter for
short alarm conditions.
7.2.4.
System
On this page, some general settings can be made.
7.2.4.1.
General
The system name, location, and contact can be used for automatic identification of device via
M2M protocols.
Summary of Contents for TCW210-TH
Page 1: ......
Page 43: ...TCW210 TH R1 16 November 2022 Page 42 Appendix A Fig 1...
