TCW112-CM-R3.2 - March 2018
Page 17
13.
Factory default settings
TCW112-CM
can be restored to its factory default settings following the steps below:
Turn off the power supply from the unit;
Press and hold the RESET button then turn on the power supply;
After turning the power supply release the RESET button. The LED’s STS and LOG will
flash 14 times, after that only the STS LED will continue to blink. The controller is
restored to its default settings.
The factory default settings are:
Username (Admin)
admin
Password (Admin)
admin
IP Address
192.168.1.2
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.1
SNMPConfiguration
disabled
readCommunity
public
writeCommunity
private
14.
Summary of Contents for TCW112-CM
Page 1: ......
Page 20: ...TCW112 CM R3 2 March 2018 Page 19 Appendix A Fig 1 Fig 2...
