Teracom TCW112-CM, User Manual

Page: 17 / 20

TCW112-CM-R3.2 - March 2018 Page 16
Command Description
http://device.ip.address/status.xml?r1=1 Turn Relay 1 ON
http://device.ip.address/status.xml?r1=0 Turn Relay 1 OFF
http://device.ip.address/status.xml?tg1=1 Toggle Relay 1 state
http://device.ip.address/status.xml?pl1=1 Pulse Relay 1
If XML/HTTP API authentication is enabled, basic access authentication is required to send HTTP
commands. The format of the commands is shown in the table below (username=admin,
pass=admin):
XML/HTTP API authentication Format
enabled http://device.ip.address/status.xml?a= admin:admin&r1=1
disabled http://device.ip.address/status.xml?r1=1
12. Firmware update
TCW112-CM supports remote firmware update. To update the device follow the steps below:
Go to www.teracomsystems.com and download the latest firmware version file from
TCW112-CM product page;
Go to the device login page, enter username and password and press the “Login”
button;
Go to “Update” menu, select the update .cod file and press “upload” button;
After the firmware update is completed, you will be forwarded to the device Login page.
Attention! Don’t turn off the power supply during the update. Turning off the power supply will
damage the device.
For some updates factory default settings procedure is mandatory.