TCW112-CM-R3.2 - March 2018
Page 5
7.1
Login page
After opening the Login page, authorization data must be entered (by default username=admin,
password=admin). It is recommended to change the username and password to prevent
unauthorized access to the controller.
The controller supports one active session – only one user can operate the device. If another
user tries to log in, the message “Someone’s logged in” appears:
The active session will be terminated automatically if the current user stays inactive for 2
minutes.
7.2
Monitoring page
After successful authorization, the “Monitoring page” appears:
The “Monitoring page” provides information about the state of the digital and analog input, relay
status, temperature, and humidity (if a sensor is connected).
Digital input can be used for monitoring the state of discrete devices – motion sensor, door contact,
relay contact, alarm output etc. The digital input is not galvanic isolated. One side of the contact is
connected to “Digital In” and another side is connected to “GND” pins. Digital input is sampled
every 30mS. The change of input status is considered valid if the same value is read in seven
consecutive samples.
Summary of Contents for TCW112-CM
Page 1: ......
Page 20: ...TCW112 CM R3 2 March 2018 Page 19 Appendix A Fig 1 Fig 2...
