16
tUrnIng oFF the poWer
1. Press the STANDBY/ON button on the projector
or the remote control. The message “Power off?”
will appear on the screen for about 5 seconds.
2. Make sure there is nothing obstructing the lens
door while it is closing. Press the
Standby/
on
button again when the message appears.
The projector lamp will go off, and the
poWer
indicator will begin blinking in orange. Then the
poWer
indicator will stop blinking and light in
steady orange when the lamp cooling is complete.
Do not turn on the projector again on for about
10 minutes. Do not turn off the projector shortly after turning it on. Such operations may
cause or shorten the lifetime of some parts or result in a malfunction.
WARNING
n
Be careful not to pinch your finger with the lens door, to prevent an injury.
n
Do not touch around the lamp cover and the exhaust vents during use or just after use.
n
Remove the power cord for complete separation. The power outlet should be close to the
projector and easily accessible.
NOTE
n
Please power off any connected devices before the projector.
n
This projector has the AUTO POWER OFF function that can make the projector turn off
automatically.
