Wireless Presentation / Computing WID130
Teq AV/IT www.teqavit.com 23
Click
[Reset to Default]
button to restore factory default settings.
Apply:
Confirmation and action.
Another way to restore Factory Default Settings, Follow below procedures.
1. Power off the WID130.
2. On the rear panel, press
[Reset]
button and
Hold.
3. Turn on WPS box.
4. Wait for over 10 seconds and release the [
Reset
] button.
5. It will restore factory default settings.
Warning:
Do NOT upgrade firmware unless written instructions are sent by Teq AV/IT support staff.
4.16 Reboot System
Click
[Reboot System]
button, to restart system