Wireless Presentation / Computing WID130
Teq AV/IT www.teqavit.com 21
Default Configuration Network Setup
The default setting of the WID130 is DHCP smart. When the WID130 is connected to a LAN that already has a DHCP server present, the
WID130 gets an IP address assigned to it by the DHCP server. When the WID130 is connected to a LAN that does not have a DHCP server,
the WID130 becomes the DHCP server on the network.
IP Setup
♦
You can select “obtain IP address automatically” or “Use the following IP address”
♦
IP Address: The default value is 192.168.100.10.
♦
Subnet Mask: The default value is 255.255.255.0
♦
Default Gateway: The default value is 192.168.100.10
DHCP Server Setup
♦
You can select “auto(Enable/Disable DHCP Server” or “Disable”
♦
Start IP: The start IP address of DHCP Server.
♦
End IP: The end IP address of DHCP Server.
Wireless Setup
♦
Region: default value is “Worldwide”.
♦
SSID: SSID string, max. Length is 32 bytes.
♦
Channel: to set fixed channel or Auto. The “Auto” means after powering on the WID130, it will scan all of wireless channels and
select the clearest channel automatically.
♦
WEP: you can Disable WEP or select one of 64bit or 128bit in ASCII or HEX string.
♦
Key: If WEP is enabled, you have to set key value according to WEP mode you selected.
Gatekeeper
Gatekeeper is designed for network security within WID130.
♦
All Block: blocks Guest Users(through wireless) to access all office network(LAN),
♦
All Allow: passes Guest Users(through wireless) to access all office network
♦
Internet Only: blocks Guest Users (through wireless) from office network (LAN) but still have internet connection capability.
Apply:
press button to select this mode
Cancel:
press button to abort action
.
Back:
Back to Operating mode main menu