Strana 5
Page 5
Centralna blokadna
sklopka:
Centralna
blokadna
sklopka
osigurava
beznaponsko otvaranje. Kada je centralna
blokadna sklopka u poziciji “OPEN” unutarnji
elementi svjetiljke nalaze se u beznaponskom
stanju (LED modul, LED EM driver, baterijski
modul…). Blokadna sklopka uključuje svjetiljku
nakon zatvaranja pokrova i zakretanje blokadne
sklopke u poziciju “CLOSE”.
Kućište:
SMC, poliester ojačan staklenim vlaknima, boja
RAL 7038
Pokrov:
PC, polikarbonat
Nazivni momenti
pritezanja:
-
pritisne matice uvodnice – 2,5 Nm
-
tijela uvodnice u kućište – 3,5 Nm
-
čepa u kućište – 4 Nm
-
vijak priključne stezaljke – 0,5 Nm
Duljina skidanja izolacije
s priključnih vodiča:
9 mm
Osnovne mjere:
PSF 28 LED / E - 790 x 200 x 130 (DxŠxV)
PSF 52 LED / E - 1370 x 200 x 130 (DxŠxV)
Masa:
PSF 28 LED / E – 9kg
PSF 52 LED / E – 12,5kg
Svjetiljka se isporučuje s max. napunjenim baterijama.
Moguće je prilikom dužeg skladištenja (više od 6mj je svjetiljka
zatvorena bez priključka na napon) da LED indikator ne proradi odmah.
Nakon toga je potrebno regenerirati baterije (puniti baterije oko 2 sata)
i tada će LED indikator proraditi.
Central interlocking
switch
Central interlocking switch provides an no-load
condition. When the central interlocking
switch is in position "OPEN" internal elements
of the lamps are in no-load condition (LED
module, LED EM driver, baterry module). The
interlocking switches power on a flashlight
after closing the cover and rotate the lock
switch in position "CLOSE".
Housing:
SMC, polyester plastic reinforced with
glass fibber, colour RAL 7038
Diffuser:
PC, polycarbonate plastic
Tightening torque:
pressure screw – 2,5 Nm
intermediate gland and plug – 3,5 Nm
plug in housing – 4 Nm
screw terminals – 0,5 Nm
Isolation stripping
length of the wires:
9mm
Dimension:
PSF 28 LED / E - 790 x 200 x 130 (LxWxH)
PSF 52 LED / E - 1370 x 200 x 130 (LxWxH)
Weight:
PSF 28 LED / E – 9kg
PSF 52 LED / E – 12,5kg
The light fitting is supplied with max. charged batteries.
It’s possible during prolonged storage (lamp is closed more than six
months without connection to the voltage) that the LED indicator doesn’t
work immediately. At that moment it’s necessary to regenerate the
batteries (recharge the batteries for approx. 2 hours) and then the LED
indicator will start to work properly.
4. TIP
4. TYPE
TIP / TYPE
P [W]
(consumption)
Un [V]
Ø [lm]
Light fitting
MASA /
WEIGHT
PSF 28 LED/1
28
110-240V AC
220-250V DC
3820
8 kg
PSF 28 LED/2
37
4880
PSF 52 LED/1
52
7110
12 kg
PSF 52 LED/2
70
9390
TIP / TYPE
P [W]
MAIN
P [W]
EM
Un [V]
Ø [lm] light fitting
MASA /
WEIGHT
MAIN
EM. 3h
PSF 28 LED/E
28
8
230
3820
1150
9 kg
PSF 52 LED/E
56
8
7645
1150
12,5 kg
5. MONTAŽA
5. MOUNTING
Svjetiljka se standardno isporučuje sa dvije Ex e uvodnice M25 (za
kabel 7-15mm), tri Ex e čepa M25 te priborom za ovjesnu montažu
(PSF 30-150).
Svjetiljka je namijenjena za vanjsku i unutarnju primjenu.
Napomene za sigurnu instalaciju i montažu:
Provjera temperature okoline
Mogućnost instalacije u zonama opasnosti 1, 2, 21, 22
Provjera mjesta ulaza kabela u svjetiljku (narušena
mehanička zaštita, IP broj)
Oštećenje svjetiljke narušava protueksplozijsku zaštitu
prostora u koji je instalirana!
Otvaranje i zatvaranje svjetiljke:
Skinuti gumenu zaštitu sa centralne blokadne
sklopke. Okrenuti centralnu osovinu 180
0
ulijevo (natpisna pločica - OPEN), s nasadnim
ključem. Klizači oslobađaju transparentni
pokrov i svjetiljka se otvara.
Prilikom zatvaranja
slijediti obrnuti redoslijed radnji.
Lighting fitting comes standard with two Ex-e cable glands M25 (for
cable 7-15mm), three Ex-e plug M25 and accessories for suspension
assembly (PSF 30-150).
The lamp is designed for indoor and outdoor use
.
Notes for safe installation and assembly:
Check the ambient temperature
Possibility of installation in hazardous areas 1, 2, 21, 22
Checking of cable entry into the fluorescent lighting fitting
(compromised mechanical protection, IP number)
Damage lamps does not ensures explosion protection of
the area in which lamp is installed!
Opening and closing of the fluorescent light fitting:
Remove the rubber protection on the central
interlocking switch. Turn the central axis 180° to the
left (marking - OPEN) with a socket wrench. Sliders
release transparent cover and the lamp opens. When
closing follow the orders of operations in reverse.
