Type PLFM 70 HSE is factory wired for High pressure sodium source of 70W and connection diagram is shown in
the following figure:
If the user wants to install High pressure sodium source of 50W, it is necessary that the brown phase conductor which
is connected to the lampholder E27 is reconnected to the two-pole terminal from 70W to 50W.
After each opening lamp protective fitting must be protected with "Baplex" protective agents (manufacturer's
recommendation).
Wiring diagram PLFM LUXOMAT:
8. DIMENSIONS
9. INSPECTION
, MAINTENANCE, REPAIR AND OVERHAUL
Inspections are carried out in accordance with IEC 60079-17:2014, general and special conditions of manufacturer
and users Regulations and includes supervision of parts on which the explosion protection depends, especially
:
that the housing, all part of housing, replacement glass and gaskets
without rupture and damage,
that the housing completely closed with replacement glass compound and that mechanical blockage against
self opening is done,
that the cable gland, plug, adapter, pressure nut of cable gland, screws cover of junction box and connection
terminal are fastened with nominal torque.
N
N
L
L
plava 1 mm
ž.z. 1 mm
smeða 1 mm
plava 1 mm
ž.z. 1 mm
smeða 1 mm
2
2
2
plava 1 mm
2
ž.z
. 1
m
m
2
smeða 1
m
m
2
smeða 1 mm
2
2
2
2
230V/50Hz
L
70W
50W
70W
50W
70W
PE
Ex e
Ex d
Svjetlosna sklopka
Adapter
ADP 24/1
Žuto-zelena
Crna
Plava
Smeða
N
PE
L1
L2
PE
Ex d
Ex db
Cable gland
PE
L
N
L'
N
PE
L1
L2
Žuto-zelena
Crna
Plava
Smeða
N
L'
L
N
L'
L
Svjetlosna sklopka
175
320
345
175
361
386
