TENTECH MD-5075x, User Manual

Page: 8 / 69

9
Activated, enables programming of 25 V
step tests voltages 25 V steps activated
Activated, enables programming of 100 V
step tests voltages 100 V steps activated
Activated, enables programming of 500 V
step tests voltages 500 V steps activated
Selection of 500 V test voltage Indicates 500 V selected
Selection of 1 kV test voltage Indicates 1 kV selected
Selection of 2.5 kV test voltage Indicates 2.5 kV selected
Selection of 5 kV test voltage Indicates 5 kV selected
These keys (decrease or increase) enable
the selection of the value that is being
programmed. –
Activates / enables programming of the limit
for the “Pass / Fail” test Indicates when the
measured resistance is
lower than programmed
limit
Start - Start test Indicates that the test is
being executed
Stop - End of test –