Tennsmith LM1014, Operation, Parts & Maintenance Manual, Page: 9 / 47

9
8.
DANGER!
Do not attempt to remove the hold down before inserting and bottoming out
the hold down compression bolts (71). The compression bolts were shipped with the
machine. When receiving the shear the bolts are located inside of the electrical box.
Please remove them and store them in a location to be accessible.
9. Do not remove guards unless required to service the machine. Replace all protective
covers prior to operation.
10. Always wear gloves to protect your hands when handling the shear blades.
11. Insure that the point of operation safeguarding is provided, used and maintained for any
applicable use or service which exposes bodily hazards. For more details please refer the
ANSI Standards for Shear Operations.
12. Keep the Work area around this machine clear and clean to avoid tripping or slipping.