Tennsmith LM1014, Operation, Parts & Maintenance Manual, Page: 13 / 47

13
If you have any questions on this procedure, please consult the factory prior to any adjustments
on your shear.
4. Stroke Selector Switch:
This switch is located towards the bottom of the panel and is designated 5 on the previous page.
The switch has two options
:
a. Cont – This is for continuous operation of the cutter head of the shear. To engage the
continuous mode, select run on switch 2 (Jog/Run Switch) and select Cont. on the stroke
selector switch. With this mode the cutter head will repeat continuously a full cycle until the
operator releases his foot from the foot pedal of the shear. This mode is useful when cutting
short strips of material that is generally 2” or less.
b. Single – With this mode, the shear will make one complete down and up cycle each time the
foot pedal is pressed. This is the standard mode of operation on this shear.
Please contact the factory if you have any questions regarding the operation of this shear.