PLDC04453
REVISION 00
December 23, 2020
TECHNICAL OFFICE
Stavale
3
Fit the support
D
to the machine’s chassis, tighten the nuts
C
manually until reaching the self-locking ring.
4
Assemble the drive motor, inserting the drive shaft into the half-support
D
.
5
Tighten the nuts
C
that fasten the half-support
E
to the machine’s chassis; do not tighten completely.
6
Tighten the screws
D1
that fasten the half-support
D
to the reduction unit on the drive motor;
do not tighten completely.
7
correct side.
Carefully insert the bearing onto the support
D
and replace the Seeger rings
F
on the shaft, from the
Fig. 95
D
C
Fig. 96
E
C
D
D1
Fig. 97
D
D
F
Fig. 98
46 of 73
