MAINTENANCE
77
Litter Hawk
t
330470 (12--00)
3. To winch the machine onto the truck or
trailer, attach the winching chains to the rear
tie down locations. The rear tie-down
locations are located near the rear of the
machine, on opposite sides of the rear
wheels.
4. Turn the bypass valve 90
_
from the normal
position before winching the machine onto
the truck or trailer. See
PUSHING OR
TOWING THE MACHINE
section of this
manual. Make sure the machine is centered.
FOR SAFETY: When loading machine
onto truck or trailer, use winch. Do not
drive the machine onto the truck or
trailer unless the loading surface is
horizontal AND is 380 mm (15 in) or less
from the ground.
5. Position the machine onto the truck or trailer
as far as possible. If the machine starts to
veer off the centerline of the truck or trailer,
stop and turn the steering wheel to center
the machine.
6. Set the parking brake and block the machine
tires. Tie down the machine to the truck or
trailer before transporting.
The front tie-down locations are located
behind the front tires.