HYDRAULICS
5-13
ATLV 4300 330495 (10--98)
9. Pull the vacuum fan impeller off the fan
motor shaft. Retain the key form the motor
shaft.
10. Remove the two hex screws and nyloc nuts
holding the vacuum fan motor to the mount
plate. Remove the motor.
NOTE: The orientation of the motor ports and the
reference hole in the mount plate.
11. Remove the hydraulic fittings from the old
motor and install in the new motor in the
same orientation.
12. Position the new motor assembly on the
mount plate in the same orientation as the
old one. Reinstall the hardware and tighten
to 37 -- 48 Nm (26 -- 34 ft. lb).
NOTE: The orientation of the motor ports and the
reference hole in the mount plate.
13. Install the vacuum fan impeller onto the
motor shaft.
NOTE: Make sure to use the key that was
removed with the old impeller.
14. Turn the assembly over and place it back on
top of the hopper cover. Hold the impeller in
place while turning over. Line up the holes in
the motor bracket with the holes in the
cover.
15. Go under the hopper cover and install the
four hex screws into vacuum fan assembly
retainer plate. Leave the hardware loose for
now. Use blue loctite (242) on the threads of
this hardware.
16. Reinstall the impeller screen, spacer, and
sleeve onto the vacuum fan motor shaft.
17. Use blue loctite (242) on the threads of the
impeller screen hardware. Reinstall the one
M8 hex screw and three M6 flat screws.
18. Tighten the M8 hex screw to 18 -- 24 Nm
(15 -- 20 ft.. lb) and the M6 flat screws to
8 -- 10 Nm (6 -- 8 ft. lb).
Summary of Contents for ATLV 4300
