Tennant A60 Operator'S Manual Download Page 13

Page: 13 / 69

TENNANT A60

English 1064354 rev. 00

- 13 -

Non-regulated use

» The vehicle can lead to dangerous situations if it is used:

by insufficiently qualified/unqualified personnel,

inexpertly, or

in contravention of the instructions.

Who may operate the vehicle?

» Only qualified and designated persons over the age of 18 may operate the vehicle.

They should be aware of their responsibilities and take these into account.

» Persons under the influence of alcohol, medication and/or drugs may

not

operate, maintain

or repair the vehicle.

» Maintenance and repairs may only be carried out by qualified and authorized persons (see

section 1.2).

Converting and modifying the vehicle

» It is prohibited to modify the vehicle yourself.
» Only use original components, accessories and lubricants. These have been designed,

approved and released especially for the vehicle by Tennant N.V..

2.3.

Safety regulations for taking into use/starting

Before starting

» Ensure that you are familiar with:

the instrument panel,

the operating and steering elements,

the operation of the vehicle, and

the operational radius.

» Before boarding the vehicle, first check:

that no persons or obstacles are in the vicinity of the vehicle,

that the vehicle is free of oil-based or inflammable materials,

that the windows, handles, steps and operating areas are free of oil, grease, fuel,
refuse, snow and ice, and

that the protective shields are closed and locked.

» Only use the steps and handles intended for the purpose when boarding the vehicle.
» Before starting, check:

that there are no obvious defects to the vehicle,

that all protective shields and safety measures are in place,

that the steering wheel, brakes, operating controls, lighting and horn are functioning,

that the seat is adjusted properly,

that the mirrors are adjusted properly.

» Never start the vehicle if the instruments, warning lamps or steering mechanism are
defective in any way
» Do not place any loose objects in the vehicle or affix anything to the vehicle.

Summary of Contents for A60






































































Search results

Summary of Contents for A60

Reviews:

Related manuals for A60

Brands by name

Popular brands

Tennant A60, Operator'S Manual

Search results

Summary of Contents for A60

Reviews:

Related manuals for A60

Brands by name

Popular brands