MAINTENANCE
3-39
95GR MM199 (10---89)
HOPPER DUST DUMP DOOR SEAL
The hopper dust dump door seal seals the rear
opening of the filter cavity. The door opens when the
hopper is dumped to allow dust shaken out of the
dust filters to exit the filter cavity. The door is made
up of a seal and an actuating lever assembly. Check
the seal for wear, damage, and adjustment after
every 100 hours of operation.
TO REPLACE DUST DUMP DOOR SEAL
1. Empty the hopper.
2. Park the machine on a level surface.
3. Raise the hopper, engage the hopper support
support bar, and lower the hopper onto the
support bar.
WARNING: Always engage the hopper
support bar before working under a raised
hopper. Do not rely on the machine hydraulic
system to keep the hopper in the “raised”
position. The hydraulic system may leak
internally, allowing the hopper to lower, crushing
anything under it.
4. Stop the engine and engage the machine
parking brake.
WARNING: Always stop the machine on a
level surface, stop the engine, and engage
the parking brake before working on the machine
to keep it from rolling.
5. Unbolt the seal and seal backing plate from the
cross shaft.
A
B
C
01506
HOPPER DUST DUMP DOOR SEAL
A. Seal Backing Plate
B. Seal
C. Cross Shaft
6. Remove the seal from the seal backing plate.
7. Install a new seal on the backing plate.
8. Bolt the seal and backing plate to the cross
shaft.
9. Check the seal adjustment as described in
To
Adjust Hopper Dust Dump Door.
Summary of Contents for 96GR
