Tennant 6100 Page 11 Operator'S Manual Download

Page: 11 / 76

OPERATION

6100E 330250 (8--98)

OPERATION OF CONTROLS

DIRECTIONAL PEDAL

The

directional pedal

controls the direction of

travel and the propelling speed of the machine.

Change the speed of the machine with the

pressure of your foot on the pedal; the harder you

press the faster the machine travels.

Use the brake pedal to stop the machine.

Forward: Press the top of the directional pedal

with the toe of your foot.

NOTE: The machine will not travel unless the

operator is sitting in the operator’s seat.

Reverse: Press the bottom of the directional pedal

with the heel of your foot.

Neutral: Take your foot off the directional pedal

and it will return to the

Neutral

position.

NOTE: The machine may coast when the foot is

taken off the directional pedal. Be prepared to

step on the brake pedal when removing foot from

directional pedal.

Summary of Contents for 6100













































































Search results

Summary of Contents for 6100

Reviews:

Related manuals for 6100

Brands by name

Popular brands

Tennant 6100, Operator'S Manual

Search results

Summary of Contents for 6100

Reviews:

Related manuals for 6100

Brands by name

Popular brands