Tennant 6100 Operator'S Manual Download

Page: 7 / 76

OPERATION

6100E 330250 (8--98)

OPERATION

OPERATOR RESPONSIBILITY

The operator’s responsibility is to take care

of the daily maintenance and checkups of

the machine to keep it in good working

condition. The operator must inform the

service mechanic or supervisor when the

maintenance intervals are required as stated

in the

MAINTENANCE

section of this

manual.

Read this manual carefully before operating

the machine. View the operation video

supplied with the machine.

FOR SAFETY: Do not operate machine,

unless operation manual is read and

understood.

Check the machine for shipping damage.

Check to make sure the machine is

complete per shipping instructions.

Keep your machine regularly maintained by

following the maintenance information in this

manual. We recommend taking advantage

of a regularly scheduled service contract

from your Tennant representative.

Order parts and supplies directly from your

authorized Tennant representative. Use the

parts manual provided when ordering parts.

After operation, follow the recommended

daily and hourly procedures stated in the

MAINTENANCE CHART

07324

Summary of Contents for 6100













































































Search results

Summary of Contents for 6100

Reviews:

Related manuals for 6100

Brands by name

Popular brands

Tennant 6100, Operator'S Manual

Search results

Summary of Contents for 6100

Reviews:

Related manuals for 6100

Brands by name

Popular brands