MAINTENANCE
71
385 MM321 (5–93)
HOPPER SIDE SKIRT
The hopper side skirt is located on the right side
of the hopper.
Check the hopper side skirt for wear or damage
daily.
BRUSH DOOR SKIRTS
The brush door skirts are located on the bottom of
each of the two main brush doors. The long skirt
should clear the floor by 3 to 6 mm. The inner
skirt should be angled so that the rear corner
touches the floor, and the front corner is
6 mm above the corner of the long skirt.
Check the skirts for wear or damage and
adjustment daily.
NOTE: The brush door skirts have slotted holes to
allow for a ground clearance adjustment. The door
must be closed for proper adjustment.
REAR SKIRTS
The two rear skirts are located on the bottom rear
of the main brush compartment. The vertical skirt
should clear the floor up to 5 mm in dusty
conditions, and touch the floor otherwise. The
recirculation skirt is self-adjusting.
Check the skirts for wear or damage and
adjustment daily.
08417
08367
08390
Summary of Contents for 385DLH
Page 1: ...385DLH MM321 Operator Manual...
Page 86: ...INDEX 385 MM321 5 95 84...
