MAINTENANCE
385 MM321 (5–93)
70
8. Insert the side brush retaining pin through
the side brush hub and shaft.
9. Secure the pin by clipping the pin keeper
over the end of the pin.
10. Disengage the hopper support bar and lower
the hopper.
11. Adjust the side brush pattern with the side
brush down pressure knob.
SIDE BRUSH GUARD
Rotate the side brush guard 90
every 200 hours
of operation. Replace the brush guard after all
four sides have been used.
SKIRTS AND SEALS
HOPPER LIP SKIRTS
The hopper lip skirts are located on the bottom
rear of the hopper. The skirts float over debris and
help deflect that debris into the hopper. The
hopper lip skirts consist of five bottom lip
segments and two additional side lip segments.
Check the hopper lip skirts for wear or damage
daily.
Replace the hopper lip skirts when they no longer
touch the floor.
08388
08389
Summary of Contents for 385DLH
Page 1: ...385DLH MM321 Operator Manual...
Page 86: ...INDEX 385 MM321 5 95 84...
