MAINTENANCE
385 MM321 (5–93)
68
To decrease the width of the main brush
pattern, turn the main brush down pressure
knob clockwise.
If the main brush pattern is tapered, more
than 15 mm on one end than the other,
adjust the taper with the taper adjustment
bracket at the drive end of the brush.
A. Loosen the bracket mounting bolts.
B. Turn the taper adjustment nut
counter-clockwise to increase the
pattern width at the brush drive end,
and clockwise to decrease the pattern
width at the brush drive end. Tighten
the mounting bolts.
C. Check the main brush pattern and
readjust as necessary. Then adjust the
width of the main brush pattern.
08348
00601
08415
08416
Summary of Contents for 385DLH
Page 1: ...385DLH MM321 Operator Manual...
Page 86: ...INDEX 385 MM321 5 95 84...
